Home/Advice/What Is a Liquid Applied Membrane Roof? A Coleshill Guide

What Is a Liquid Applied Membrane Roof? A Coleshill Guide

Thinking about a liquid applied membrane for your flat roof in Coleshill? Here's how it works, what it costs, and when it beats a full re-roof.

If you've had a flat roof surveyor mention a 'liquid applied membrane' and you're not quite sure what that means, you're not alone. It's one of the most common ways we waterproof flat roofs on homes, outbuildings and commercial units across Coleshill, and it's worth understanding before you commit to any roofing work.

So what actually is a liquid applied membrane?

A liquid applied membrane is a waterproofing system that's rollered or sprayed onto a roof as a liquid, rather than laid as sheets or rolls like felt or single-ply membrane. It cures in place to form a single, seamless, fully bonded layer, with no joints, seams or welds for water to find its way through. That's the main thing that sets it apart from felt roofing, where most leaks start at an overlap or a poorly sealed detail.

Most systems use a layer of reinforcing fleece or glass matting embedded into the first coat, with further coats built up over the top to reach the specified thickness. This gives the finished membrane strength as well as flexibility, so it can cope with a roof deck moving slightly with temperature changes without cracking.

  • Polyurethane (PU) - flexible, good for roofs with lots of detailing like upstands and pipe penetrations
  • PMMA (acrylic) resin - cures quickly, useful when the weather window is short
  • Hybrid polyurea/polyurethane - very fast curing, often used where a roof needs to go back into use quickly

How it's actually applied to a flat roof

The process starts with cleaning and repairing the existing roof surface, then priming it so the membrane bonds properly. Detailing around upstands, outlets, rooflights and pipes gets reinforced first, because that's where most flat roofs eventually fail. The main field of the roof is then built up in coats, typically to a dry film thickness of somewhere between 1.5mm and 3mm depending on the manufacturer's specification and how the roof is used.

One of the real advantages for older Coleshill properties is that a liquid membrane will often bond directly to an existing felt, asphalt, GRP or even metal roof, provided it's sound and dry underneath. That means a lot of jobs can be done as an overlay rather than a full strip-out, which keeps disruption and cost down.

Why this suits a lot of roofs around Coleshill

Coleshill has a real mix of roof stock, from older felt and asphalt roofs on houses and extensions to the flat-roofed industrial and warehouse units around places like Faraday Avenue and the business parks near the M6/M42 junction. A lot of these were built from the 1970s through to the 1990s, and the original roof covering is often nearing or past its expected life.

Liquid membranes are particularly useful where the existing roof contains older materials that are best left undisturbed, such as some asphalt built-up systems that can contain bonded asbestos. Overlaying with a liquid system, after a proper survey, can avoid the cost and disruption of removal. It's also practical where a building needs to stay in use during the work, since it can often be applied in sections.

The one real constraint locally is the weather. Most liquid membranes need a dry substrate and a minimum temperature, typically around 5C and rising, to cure correctly, so we tend to plan these jobs for spring through to early autumn rather than the depths of a Midlands winter.

What does it cost, and how long does it last?

Costs vary a fair amount depending on the condition of the existing roof, how much repair work is needed first, access (a bungalow extension roof is very different to a warehouse roof needing scaffold), and which membrane system is specified. As a rough guide, straightforward polyurethane or PMMA systems on a domestic or small commercial flat roof in the Coleshill area often fall somewhere in the £45 to £90 per square metre range, with detailing-heavy or hard-to-access roofs costing more.

A well-installed liquid membrane, properly maintained, typically has a service life of around 15 to 25 years depending on the product and how the roof is used. That compares reasonably well against a felt re-roof, and the lack of seams tends to mean fewer call-outs for leaks over that period.

Choosing the right system and installer

Not every liquid membrane is suitable for every roof, so the specification should come from a proper survey rather than a one-size-fits-all quote. Look for an installer who's trained and approved by the membrane manufacturer, since that's what the product guarantee usually depends on, and ask what that guarantee actually covers and for how long.

It's also worth agreeing a simple annual inspection, particularly after a hard winter or a storm, so any damage to outlets or detailing gets picked up before it turns into a leak inside the building.

Frequently asked questions

Can a liquid membrane be applied over my existing felt or asphalt roof?

In most cases yes, as long as the existing roof is structurally sound, dry, and properly cleaned and primed first. A survey will confirm whether an overlay is suitable or whether some repair or part strip-out is needed before application.

How long does it take to install on a typical Coleshill property?

A domestic flat roof or extension can often be done in a day or two once the roof is prepared, while larger commercial roofs may take one to several weeks depending on size and detailing. Dry, mild weather is needed throughout, so timings can shift around unsettled spells.

Is a liquid applied membrane cheaper than a full re-roof?

It's often more cost-effective than stripping a roof back to the deck, mainly because it can frequently be applied over the existing covering. Exact savings depend on the roof's condition and size, so it's worth getting a firm quote for both options before deciding.

Published 2026-10-22 by Absolute Waterproofing Limited.

Next step

Want a surveyor to look at it?

Send us the outline through the form and one of the team will come back to you, usually the same working day.

Make an enquiry

Have a project for us?

Give us the outline below, or email sales@absolutewp.co.uk, and one of our surveyors will come back to you, usually the same working day.

Your division South and Midlands office Jubilee Estate, Gorsey Lane, Coleshill, West Midlands B46 1JU Call the Midlands office Email us
Your division North and Scotland office Riverside, Mountbatten Way, Congleton CW12 1DY Call the Northern office Email us
Free diagnostic survey We attend site quickly from the initial enquiry and provide an inspection report at no cost, with digital photographs, options and costs for the proposed work.

Prefer to talk it through? Call the office nearest the site and ask for a surveyor.